Description
When winter roads leave your ride covered in salt, brine, and grime, it’s time to tell that mess to get Salt Outta Here.
This premium road salt remover from The Mob Chemist is designed to help clean salt-contaminated exterior surfaces, undercarriages, wheel wells, and other areas affected by winter road treatments. Road salt and brine can cling to your vehicle long after a storm is over, especially in hidden areas underneath the vehicle and around the wheels.
Salt Outta Here is a powerful, dilutable salt remover spray designed for use during winter washes, post-storm cleanup, fleet maintenance, and routine vehicle care. Whether you're looking for a salt remover car enthusiasts can use at home or a practical solution for professional vehicle maintenance, Salt Outta Here helps target stubborn salt buildup where it collects most.
For the best results, dilute before use and apply with a sprayer, foam cannon, sponge, wash mitt, or soft brush. Allow the solution to dwell briefly, agitate as needed, and rinse thoroughly with clean water.
Key Benefits
- Helps break down and remove road salt buildup
- Effective road salt remover for winter-contaminated vehicle surfaces
- Great for undercarriages, wheel wells, lower panels, rocker panels, and bumpers
- Ideal for a car wash for salt removal after winter storms and salty-road driving
- Convenient salt remover spray application
- Dilutable formula: typically 1–2 oz per 3 gallons of water, depending on application
- Can be applied with a spray bottle, foam cannon, pump sprayer, sponge, wash mitt, or soft brush
- Great for cars, trucks, SUVs, trailers, RVs, UTVs, and fleet vehicles
- A practical addition to your collection of salt removal products
- Available in 16 oz and 1 gallon sizes
- USA-made by The Mob Chemist
Works Great On:
Salt-contaminated exterior surfaces, undercarriages, wheel wells, lower panels, bumpers, rocker panels, suspension areas, and other vehicle surfaces where winter salt and brine collect.
Directions:
1. Dilute before use. Adjust the dilution according to the severity of contamination. Typical dilution can range from 1:3 to 1:100. For foam cannon use, 2 oz of product per 8 oz of water is recommended.
2. Apply the diluted solution using a spray bottle, foam cannon, or pump sprayer.
3. Allow the solution to dwell for 1–2 minutes to penetrate, react with, and encapsulate contaminants.
4. Agitate stubborn deposits with a suitable brush, sponge, or wash mitt.
5. Rinse the surface thoroughly with clean water to remove loosened salt and residue.
6. Dry the surface with a clean, lint-free cloth or allow it to air dry.
Pro Tips:
Focus on lower panels, wheel wells, rocker panels, undercarriages, and other areas where salt and winter grime tend to accumulate.
For heavy winter buildup, rinse away loose dirt and grime first. Apply diluted Salt Outta Here, allow it to dwell, agitate as needed, and rinse thoroughly.
Important Use Notes:
Always dilute before use. Do not apply to hot surfaces or use in direct sunlight. Do not allow the product to dry on the surface. Rinse thoroughly with clean water after use. If you're unsure about surface compatibility, test the product first in an inconspicuous area.
If you're comparing salt removal products and looking for the best salt remover for winter vehicle cleaning, Salt Outta Here provides a convenient, dilutable solution specifically designed to help tackle salt buildup on the areas of your vehicle that need attention most.
The Mob Chemist
